UniFi – Where is ?

You will see in many of our configuration instructions. When following these instructions you are supposed to substitute with the corresponding location in your computer. Its location will vary depending on your operating system. Find in the following directories:...

Cable Test from CLI

Cable test is available through the CLI: swctrl -d cable show And you should expect something similar like: BusyBox v1.19.4 (2017-03-10 11:34:48 PST) built-in shell (ash) Enter ‘help’ for a list of built-in commands. US.v3.7.47# swctrl -d cable show Port...

EdgeMAX – Set up L2TP over IPsec VPN server

Interface and NAT Configuration To configure the allowed networks and NAT traversal on an interface, use the following commands: set vpn ipsec ipsec-interfaces interface eth0 set vpn ipsec nat-networks allowed-network 10.0.0.0/8 set vpn ipsec nat-networks...

Block Websites Using DPI

Here is an example of configuring a custom application category and firewall rule to block traffic for Facebook. You could also use the default application categories or create other custom categories. configure #If DPI is not already enabled set system...

EdgeMAX – Web proxy service for filtering

How the web proxy service can be configured via EdgeRouter’s CLI? A web proxy is useful for blocking, allowing or redirecting web traffic. There are a number of options associated with the web proxy service: hg@optusnet# set service webproxy ? administrator...

How to install the UniFi Controller on Ubuntu

I have updated this post for new information on 16/01/2016 Ubiquiti UniFi is properly supported on Ubuntu and Debian, breaking away from being Windows only. Being on Linux also reduces a lot of overhead that Windows typically laid on. The installation instructions...

Pin It on Pinterest